Sunday, July 14, 2013

Enhance Safety In A Home Through A Crawl Space Encapsulation Charleston SC Contractor

Enhance Safety In A Home Through A Crawl Space Encapsulation Charleston SC Contractor

By Carmella Watts


When crawl spaces are left unsealed, they allow moisture to get into a home causing troubles. Moisture creates the right condition for growth of molds and mildew. It also causes decay of organic material in a building such as wood floors and wooden furniture. Molds release spores which are dispersed in air and can be inhaled by people living in a home. You can prevent most of these problems by consulting a crawl space encapsulation Charleston SC contractor to seal the surfaces on basement area.

You can correct the problems arising from moisture in basement spaces by ensuring that they are sealed properly. When water penetrates the ground, it may gain access to basement space through porous concrete and cracks. This way, your home becomes damp as the moisture rises from the basement space surface to higher regions of a home such as the living area. This occurs the same way smoke rises from the fireplace to through the chimney to the outside.

Much of the moisture and increased humidly in homes comes from the vented spaces on the basement. These areas allow water to get into the basement spaces thus increasing moisture content. The increased humid in homes causes destruction since it creates the right environment for growth of molds and mildew. It also allows fungus to grow in those hidden areas.

A musty odor is released to the living area from the basement due to decomposing organic matter. When moisture gets to your basement space, it rises with the air to the higher regions of the interiors of your home where it leaves the house through the doors and windows. The rising air occurs in the same manner the smoke rises through the chimney.

Keeping the area dry can be achieved by insulating the space with materials that prevent moisture from getting in the basement space. Moisture that seeps through porous concrete may cause molds to grow. When encapsulation is done, it seals the surface on basement preventing water and moisture. When air warms in a house, it rises and comes out of the home from the upper regions. This is known as the stack effect and it occurs the same way smoke leaves through the chimney.

When you notice condensation or sweating on your air conditioning vents and ducts, this may be a sign that there is increased moisture in the home. Moreover, condensation may also be witnessed in water pipes, insulation and truss plates within basement space. Hardwoods floors are likely to be buckled while tile floors begin staining due to moisture and growth of molds.

The insects are not able to feed on molds and the vermin does not feed on insects. Through encapsulation, the ground is covered with vapor barrier and the junctions and seams are sealed with the moisture proof material. Vents in the basement space are also sealed. After the sealing, treatment of the surface is done to dehumidify any existing moisture to make the area dry.

There are other benefits of sealing the basement with vapor barriers and they include increased energy efficiency. When there is moisture, homeowners are likely to incur increased cost of heating and drying homes and therefore, they can prevent this phenomenon by sealing the surfaces. The encapsulating barrier breaks the ecological chains, which support insect infestations. The crawl space encapsulation Charleston SC contractors ensure that your basement area is sealed properly.




About the Author:



Share This

No comments:

Post a Comment

Designed By Blogger Templates