Sunday, August 25, 2013

Tips For The Best Cabinet Refacing

Tips For The Best Cabinet Refacing

By Celina Heath


A cabinet refacing in Kansas City will be a simple and easy procedure. You would only have to consider some things such as checking the condition of a cabinet that will be refaced it is still sturdy or functional on the inside. The overall structure of the furniture would remain the same while the door or drawers will be removed or replaced with some materials.

All materials that could be selected will range from either solid wood or veneers. Some kitchen remodeling will not even include some changes in its layout that will make the whole process an easy one. There are also steps that could be followed if you want to make it a lot better and easier.

The tools that would be needed are mostly contact cement, lacquer thinner, sandpaper, brush, rags, tape measure, veneer scraper, pencil and a work table. Be sure to provide and purchase the right tools since these are desirable to have a desirable result. You may as well plan for the design and colors that you want to incorporate in this project.

The first thing that you will have to do is take away the doors or drawers from your cabinets. It will be better if you would put a label on some parts especially those inner sides of some components that will be removed. This can be done with the use of a masking tape and even a pen. You must avoid putting marks on the outer portion.

Have a container to secure the screws that you will be removing. It would only be an additional cost if you would lose these screws because you would need to buy another one for replacement. To accomplish the project immediately, you must put the screws and bolts in an appropriate place.

You must also measure the size of your cabinets. After having research and deciding about some things that you wish to have, you will need the accurate measurements to order some materials. You may also sketch its layout and label some of its sections to keep everything in order. Record all measurements from the doors and drawer into the diagram as well.

You should clean the surfaces that you should have to repaint. When refacing will be done in the kitchen, the area will be full of food splatters, grease and steam. Before starting the process of sanding and repainting, you could use a solution that is intended to clean up such mess. You must rinse it carefully and do not let it soak in water. Keep it dry if possible.

Painting will always be affordable than the entire refacing task. In events that your budget is tight, it would be the best choice for you. There are some people who will prefer to have a painted furniture that those that will appear like a natural wood surface. Yet, the preparation for this will be very essential so that you will have a better result.

You should always remember that quality comes at a certain price. If you are looking for a cheap cabinet refacing in Kansas City project, then probably you will not get the high quality that you desire. You would only end up saving money temporarily but in the end, you will have to pay a lot of cost for maintenance and for some repairs.




About the Author:



Share This

No comments:

Post a Comment

Designed By Blogger Templates