Wednesday, May 21, 2014

Techniques On Foundation Crack Repair

Techniques On Foundation Crack Repair

By Minnie Whitley


Being in a construction project, engineers and architects know the importance of using high quality standard materials. This will be an assurance that the constructed building is sturdy and earthquake ready. A minor crack in the building can cause the whole structure to break down. People should know the importance of every single material in constructing a strength worthy building.

Natural calamities, on the other hand, cannot be prevented. They are natural occurrences caused by nature, and nature alone is capable of unleashing its full power. This can cause destruction to homes, establishments, highways, and other construction building. Cracks in the building are critical and cause severe damage. Foundation crack repair Atlanta is here to help remedy that problem.

There are fissures on the wall that might not be noticeable at first glance. These are those that measures lesser than 1/64 of an inch. Pretty small, but can be a trigger for bigger problems. Some of them are caused by the geographical movement of plates, substandard building foundation, and shrinking due to the changing weathers.

One process that most repair companies in Atlanta provide to clients, is the crack injection process. Injection has been an accepted process to remedy cracks. Most contractors are switching to this method, since it is cost saving, reliable and permanent. Low pressure injection works best for all types of fissure. More than ninety nine percent, crack injection will fix the problem.

An injection type tube is filled with polyurethane or epoxy for this process. Gaps are then filled entirely from the front until the back part. To make sure that every gap is filled, low pressure application is best used, especially for basement walls. It can cure any type of gap width, even those measuring up to twelve inches in thickness. It can also be used in ceilings or concrete floors.

People are asking what is the standard width of the gap that they should be alarmed about. But, the American Standard Institute does not have a definite answer to that. The entire perspective would depend on the building contractor and engineer. But it is for a fact, that any fissure wider than a card can be a possible safety threat.

A repaired fissure can also lead to protruding walls that are quite not charming to look at. The repair lines itself is more visible than the crack itself. This can be disguised using methods like saw cutting and staining. You can cover it with an overlay and make it more presentable. More importantly, any crack, big or small should be checked right away.

Some people would panic by just seeing a single rift on their homes. Though cracks are not at all the same, still it is much safer to treat each of them the same. Treat or a fix any visible fissure that can cause more danger if not treated. Your safety greatly matters, so do not jeopardize it. Anything that can be a potential risk to the lives of people should be taken seriously.

A visible crack that runs along the basement floor, and reaches the top of your wall is alarming. It only means that the soil supporting your home is moving. Structural engineers and repair companies are available in Atlanta. Let them check your foundation cracks and see the possible repair solutions.




About the Author:



Share This

No comments:

Post a Comment

Designed By Blogger Templates