Saturday, April 4, 2015

How To Lengthen The Life Of Gaskets For Commercial Refrigerators

How To Lengthen The Life Of Gaskets For Commercial Refrigerators

By Aimee Schwartz


A refrigeration gasket plays a critical role when it comes to the correct operation of a refrigerator and freezer. Thus, it is imperative that proper maintenance is done so that the refrigerator and freezer maintains a food-safe holding temperature. If there is a misaligned, torn, or dirty gasket, then cold air will leak out and that will just increase energy consumption.

As luck would have it, the market nowadays is abundant with the said product. Thus, you are able to get your hands on a quality gasket when you need it the most. You can find them in various designs and specifications. Whatever you need for your refrigerator, you are able to find suitable gaskets for commercial refrigerators.

The said product is usually required for coolers, undercounter units, and other similar pieces that have a magnetic design. These equipment's embedded magnet is what ensures that an airtight seal is present for your refrigerator. With that, you can keep cold air from ever leaking out from your refrigeration unit.

If you are installing the gasket, you should take the time to do it and make sure that the gasket is properly seated. The process of installing the gasket depends on the design of the refrigerator that you are handling. You should do it properly because improper installation can cause damage in the future.

It would be beneficial for you to have this product properly installed in your unit. The next thing that you have to worry about when you have this product is its lifespan. It is important to note some tips to take advantage of to extend the lifespan of this product. Here are the basic tips that you should note when caring for this product.

First, it is only a given for you to do a regular clean-up for this equipment. The gasket must be cleaned up at least once a week with the use of soap, warm water, and an abrasive cloth. You should clean the surface as well as the groves of this product. You should also make sure to check the said product for cuts, tears, and rips.

Encourage everyone to properly open the door of the refrigerator. The correct way to open the door of the said equipment is to use its handle. Never run your fingernails over the gasket. Also, never pull on the gasket itself. These are the main reasons why there are tears, rips, and cuts on the said product.

It is also a must for a person to ensure that the drawers of a refrigerator are properly opening and closing. This is the basic sign that the drawer is properly aligned. When the drawer is not properly aligned, then they are more likely to catch on the gasket. Again, the misaligned drawers can cause tears, rips, and cuts on the gasket of your refrigerator.

The said tips are just the basics that you can take advantage of. You must make sure to follow the said basics because they are the ones that you can use to protect the product you have installed in the refrigeration unit. There may be other helpful tips you can follow so take note of them as well. It is important that you take care of your refrigeration unit to avoid costly repairs in the future.




About the Author:



Share This

No comments:

Post a Comment

Designed By Blogger Templates