Tuesday, August 27, 2013

Design Car Park Layouts Through Help Of A Parking Lot Striping Columbus Contractor

Design Car Park Layouts Through Help Of A Parking Lot Striping Columbus Contractor

By Debra Cooley


If you have leased or purchased a business premises for your brick and motor store, you have to provide areas where drivers can pull their cars before they get into your store for shopping. Other premises like hospitals and shopping malls also need to have well designed car parks for their clients. The input of a parking lot striping Columbus contractor is needed when you want to design and paint stalls and lines on car parks.

Since you do not want your clients to have a bad experience when they come to your premises, you need to make sure they are happy. When you provide them with stalls to pull in vehicles, they are contented. If your premises have not been striped, you have to make sure they are at least painted to help motorist pull their cars in and out.

There are many options you can choose when you want to mark lines on lanes and car park stalls. The layout you select depends on your preferences, the amount of traffic you handle and the space available. If you have a small space and you want to safely accommodate many cars, you should choose a line striping style that does not take a lot of space.

The crossing lines need to be clearly visible so that people do not cross roads in the wrong areas. This may go a long way in reducing accidents and personal injuries from occurring with your premises. Considering that there are many options to choose when designing the layout and styles for car parks, the involvement of a professional designer is critical.

These double lines give a buffer, which makes it easier for drivers to enter or leave a parked car. In order to make the double lines strip classier, you may use round end strips. The ends of the lines have a decorated round half circle and not a square flat ending as witnessed in standard style. If you do not want to have a lot of work on this task, you may choose single lines strip.

However, the double lined style is preferred if you want to create a buffer that allows motorists to open car doors widely. The space between one stall and other is more when you use the double lines. But also bear in mind that it is more expensive. In addition, you may have a round end strip that looks classier than the standard one.

Besides the lines, you also need to consider the angles. Car parks can be designed of different angles. You could opt for 90-degree stall where the cars are positioned perpendicular to the curb face. However, the problem with the right-angled stalls is that it is not easy for the motorists to pull in their cars.

The less angled stalls may be more preferable since they allow drivers to park easily. A 45-degree line strip may be opted when you want to ensure your customers do not face problems parking. But the less angled strips only allow movement of traffic from one direction. In essence, you need to consult a parking lot striping Columbus contractor to explain the right layout for your design.




About the Author:



Share This

No comments:

Post a Comment

Designed By Blogger Templates