Friday, October 4, 2013

Repairing Drywall Glitches

Repairing Drywall Glitches

By Brian Winters


When drywall repairs don't come out smooth as you want it to be, you may end up re-doing the process to conceal the remaining flaws and imperfections. This is normal for every homeowner, especially if you don't have enough experience in repairing drywall.

Keep in mind that having the right joint compound consistency is the key on how to create perfect drywall patches. Do not use the mud if it's too stiff or loose. You can buy premixed compounds if you are having a hard time using those in powdered forms.

Do not forget to wipe the blade with warm water to prevent the mud from getting sticky. You may have a bumpy surface afterwards if you use a taping knife with lumps of solid mud. Invest in quality taping knives if you will be carrying out large-scale drywall repairs in the future.

Drywall Overcuts

Dealing with drywall overcuts should be easy if you have an idea how to repair drywall holes. Use a mesh tape to cover the hole and apply a layer of joint compound to cover the tape pieces. Let it dry before applying a second coating. Lightly sand the panel to smooth the area before swiping a layer of finishing compound. Make sure to feather out the mud on the edges before applying primer and paint.

Oversanded Drywall

Believe it or not, removing the paper face part of the drywall is easy by oversanding the panel. Many homeowners commit this mistake, thus creating a damaged surface to the entire drywall. Simply apply a thin coating of mud to the surface and lightly sand it once it dries.

Bubbled Drywall Tape

This is a normal problem if the tape hasn't been embedded properly into the joint compound. Eliminate the air pockets by removing the damaged area with a sharp utility knife. Re-tape the panel and press the mesh tape to achieve an even surface. Apply a thin coating of drywall mud and let it dry. You may have to apply a second layer of mud to cover the entire panel. Once dry, lightly sand to remove the remaining imperfections. Prime and paint.

Drywall Nail Pops

This usually happens when the nails or screws are not countersinked properly. That is why it is important to drill the nails below the surface area to avoid having drywall pop. Start by removing the chipped area and drill screws to the drywall. Cover the holes with mud and sand lightly.

If you have enough patience in perfecting your technique, repairing drywall problems shouldn't be that difficult. If you are not confident in carrying out repairs on your own, feel free to ask help from the experts.




About the Author:



Share This

No comments:

Post a Comment

Designed By Blogger Templates